The RayFlash Ringflash Adapter
 |
| Image from "Heathers NTM Shoot" film on PT4U |
The Ringflash Adapter is unique! It was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of internal prisms, reflectors and light-shapers to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered, i.e. have a cable from ringflash to power pack.
The Ringflash Adapter creates a very special lighting effect: a "3D shadow-wrapped look". Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait and beauty images as a main or fill-in light.
 |
| Without the Ringflash With the Ringflash |
The Ringflash Adapter does not change the colour temperature of the flash unit and the additional weight can easily be accommodated by the on-camera flash unit.
 |
| Images from "Heathers NTM Shoot" film on PT4U |
Exposure control: When using Canon or Nikon cameras (or their derivatives) all TTL functions are operational as usual, as well as manual. In manual control the exposure is by use of a light meter or through test-shots on a digital camera.
 |
| Image from "Heathers NTM Shoot" film on PT4U |
For more information on the RayFlash Ringflash Adapter click HERE
To see "Heathers NTM Shoot with Ringflash" on PT4U click HERE
